Xerox DocuColor 12 Printer with Matchprint Professional Server 用户指南
Matchprint Professional Server for Xerox DocuColor 12 User Guide
©2002 Kodak Polychrome Graphics. All Rights Reserved.
61
Adding Custom ICC Profiles
1. Add custom ICC profiles to the Matchprint Professional Server by copying
the files to c:/Program Files/Kodak Polychrome
Graphics/Color/Profiles/Destination or Source.
Graphics/Color/Profiles/Destination or Source.
2. Exit the Matchprint Professional Server software and restart the
application to access the custom ICC profiles.
User Roles
When the Matchprint Professional Server software is first installed, Always run as
Administrator is enabled and roles are disabled. Roles should be enabled when
production workflow indicates a need to protect color or parameter settings and
access to managing the print queue. Allowing only the administrator or operator to
access certain settings, prevents workflow disruptions caused by tampering.
Administrator is enabled and roles are disabled. Roles should be enabled when
production workflow indicates a need to protect color or parameter settings and
access to managing the print queue. Allowing only the administrator or operator to
access certain settings, prevents workflow disruptions caused by tampering.
There are three user roles: Administrator, Operator, and Guest. Each role allows the
user to perform various tasks within the program.
user to perform various tasks within the program.
Administrator can perform all functions in the program. A password is
required.
Operator can perform most functions except configuration. A password is
required.
Guest has read-only access to the program. No password is required.
Note: The currently active role is displayed in the status bar.
Role Management
Role Management is only available to the Administrator. The Administrator is the
only one who can access the Preferences Roles tab setting where Role Management
only one who can access the Preferences Roles tab setting where Role Management
is changed. Operator or Guest roles cannot view the Preferences setting.
Important! If you enable roles, be sure to remember the Administrator
password. If the Administrator password is lost, you should re-install the
software to reset Always Run as Administrator function or call technical
support for assistance. The default setting during software installation leaves
password. If the Administrator password is lost, you should re-install the
software to reset Always Run as Administrator function or call technical
support for assistance. The default setting during software installation leaves
roles disabled and the passwords empty.
To access Role Management, go to File > Options > Preferences and click on the
Roles tab.
Roles tab.