Xerox DocuColor 12 Printer with Matchprint Professional Server 安装指南

Hardware Installation and Startup Procedure

12

52-0001-4320-7, Rev. B

Imation Corp. 



2001

For color critical customers, Imation recommends daily calibration and recalibration
each time the printer is serviced.

Printer calibration can be performed internally by using the DocuColor 12™ built-in
scanner or by using the Spectrostar™ Spectrocam™, an external measurement device,
on the DocuColor 12™ LP. Both procedures are described in this section. If calibration
is to be performed using the Spectrocam, please go through the following
Spectrocam™ Setup instructions before beginning the calibration process.

If calibration is to be performed using the DocuColor 12 scanner, please skip to the
section titled, Calibration Procedure.

1. 

Shut down the computer.

2. 

Make sure you have connected the Spectrocam™ to the COM 1 (or appropriate)
serial port on the back of the Imation Matchprint™ Professional Server.

3. 

Plug the Spectrocam power connector into the AC adapter and then plug the AC
adapter into a power outlet.

4. 

Power on the computer.

5. 

Launch the Imation Matchprint™ Professional Server software.

Note: Always disconnect the Spectrocam™ from the AC power supply before removing

the Spectrocam™ from the Imation Matchprint Professional Server.

1. 

From the Printer menu, select XeroxDocuColor 12 (or the name of the printer
requiring calibration). The Printer Settings window displays.