Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server 用户指南
You can configure IPv4 settings at the press Control Panel or through CentreWare
Internet Services. You can only configure IPv6 through CentreWare Internet Services.
TCP/IP must be enabled at the press before you can access CentreWare Internet Services.
Internet Services. You can only configure IPv6 through CentreWare Internet Services.
TCP/IP must be enabled at the press before you can access CentreWare Internet Services.
IPv6 is optional and may be used in addition to or in place of IPv4. IPv6 hosts can
automatically configure themselves when connected to a routed IPv6 network using
Internet Control Message Protocol Version 6 (ICMPv6). ICMPv6 performs error reporting
for IP along with other diagnostic functions. When first connected to a network, a host
sends a link-local multicast router solicitation request for its configuration parameters.
Routers respond to this request with a router advertisement packet containing
network-layer configuration parameters.
automatically configure themselves when connected to a routed IPv6 network using
Internet Control Message Protocol Version 6 (ICMPv6). ICMPv6 performs error reporting
for IP along with other diagnostic functions. When first connected to a network, a host
sends a link-local multicast router solicitation request for its configuration parameters.
Routers respond to this request with a router advertisement packet containing
network-layer configuration parameters.
To configure TCP/IP settings in CentreWare Internet Services:
1. In CentreWare Internet Services, select the Properties tab.
2. Select Connectivity > Protocols > TCP/IP.
3. To enable both IPv4 and IPv6, touch IP Mode and select IPv6 or Dual Stack.
4. Type a unique Host Name for your press. The host name is the same for IPv4 and
1. In CentreWare Internet Services, select the Properties tab.
2. Select Connectivity > Protocols > TCP/IP.
3. To enable both IPv4 and IPv6, touch IP Mode and select IPv6 or Dual Stack.
4. Type a unique Host Name for your press. The host name is the same for IPv4 and
IPv6.
5. Select the appropriate method for obtaining a dynamic IP address from the IP
Address Resolution pull-down menu, or, select Static to define a static IP address.
6. If you select Static, type the IP Address, Subnet Mask and Gateway Address in the
appropriate fields.
Note
This item is not necessary if either DHCP, BOOTP, RARP, or DHCP/Autonet has been
selected from the Get IP Address pull-down menu.
selected from the Get IP Address pull-down menu.
7. Set the Subnet Mask and Gateway Address.
Note
This item is not necessary if either DHCP, BOOTP, RARP, or DHCP/Autonet has been
selected.
selected.
8. Type a valid Domain Name.
9. Set the DNS configuration information.
9. Set the DNS configuration information.
a) Select Enabled next to Obtain DNS Server Address Automatically to allow the
DHCP server to provide the DNS server address.
b) Clear the checkbox to manually provide the DNS server address in the appropriate
fields.
Note
This item is not necessary if DHCP has been specified.
c) Type an IP address for the Preferred DNS Server, Alternate DNS Server 1 and
Alternate DNS Server 2.
d) Next to Dynamic DNS Registration (DDNS), select Enabled to register the host
name of the press in the DNS server. Select Overwrite to overwrite existing entries
in the DNS server.
in the DNS server.
Xerox
®
Versant
®
80 Press
6-14
System Administration Guide
Using CentreWare Internet Services Settings