Xerox DocuColor 12 Printer with Matchprint Professional Server 安装指南

2003 Kodak Polychrome Graphics. All rights reserved. 

•  Make sure all cable connections are secure. 

•  Make sure the Xerox copier/printer is powered on. 

•  Make sure the Matchprint Professional Server is powered on. 

•  Make sure the printer interface card has not been dislodged in the chassis during the installation 

process.   

If both systems are on and the server is still not responding correctly, power off then power on the Xerox 
copier/printer. Then power off and power on the server. 

 

 

Equipment not arriving on time. 

TXC is responsible for all deliveries. Please contact 
Don Howarth at 310-333-2342. 

Equipment looks used. 

TXC is responsible for all deliveries. Please contact 
Don Howarth at 310-333-2342. 

Rigger (installer) just dropped off the 
Matchprint Professional Server server, but 
only setup the DC12.  

1.  Contact your sales CBU. 

2.  Walk the customer through the Hardware 

Installation and Quick Start Guide to get system 
usable. 

INSTALLATION 

1.  Unit was just dropped off - the system 

isn't up and running.  

2.  What can the customer do to finish 

installation? 

3.  Once the Matchprint Professional Server 

is connected and powered up, what do we 
do next? 

1.  The Rigger (installer) contracted by Xerox is to 

setup the server with cables connected to the 
DC12 and Power Plug connected and then stop. 

2.  Follow the hardware installation/setup Guide to 

complete the setup. 

3.  Find the Quick Start Guide that came with the 

Server or find the Guide on the Matchprint 
Professional Server Version 3.0 CD in the 
Matchprint Professional Server documentation 
folder. Be sure to cancel the installation process 
which starts automatically 

Network Setup information? 

See the network setup information located in Network 
Guide located on the Matchprint Professional Server 
Version 3.0 CD in the MPS documentation folder. Be 
sure to cancel the installation process which starts 
automatically