Xerox DocuColor 12 Printer with Splash G630 用户指南

Splash Color Option Settings

Splash G630 User Guide

                                                                  

the RGB content of a particular document to provide a 
more accurate match with the monitor. The Gamma 
options are as follows:

•

•

•

Normal (1.8) 

•

•

Splash RGB color correction provides three standard 
White Point options. The options simulate various 
lighting conditions for proofing color documents. Use 
these options to adjust the RGB content in a particular 
document relative to the White Point of the monitor. If 
flesh tones or red tones are too magenta, skies and 
other blues too cyan, and grass and greens too dark 
(almost bluish), change the White Point setting from 
Normal to More Blue. If flesh tones and reds are too 
yellow, blues too purple, and greens too yellow, 
change the White Point setting from Normal to More 
Yellow.

The White Point options are:

•

•

Normal (D65) 

•

To apply Splash CMYK color correction to a print job 
on a Macintosh, WinNT or Win2000 client, select the 
CMYK Press Color Correction check box, then 
select the appropriate CMYK Press Profile from the 
pop-up menu options. 

To apply Splash CMYK color correction to a Win98/
Me client print job, select “Enabled” in the CMYK 
Press Color Correction menu, then select the 
appropriate CMYK Press Profile. 

•

SWOP simulates SWOP inks.

•

Euroscale simulates Euroscale press inks.

•

Enhanced prints vivid colors on your output. 

(This profile is not intended for printing press proofs.)

Custom1 through Custom10 are customizable CMYK 
Press Profile options set at the Splash server. Ask your 
Splash server administrator about the current settings 
for these options.

The Splash server provides two standard CMYK press 
ink color correction profiles (SWOP and Euroscale) 
and ten custom CMYK profiles. All profiles are new 
style 4D profiles. The CMYK color correction profiles 
simulate commercial press inks in your output when 
you print CMYK documents to the Splash server. 
They work with CMYK Press Color Correction to 
automatically compensate for differences in press ink 
colors.

To apply color correction to a job, enable Splash 
CMYK Press Color Correction and select a color 
profile as described in the previous section. For 
instructions on setting new CMYK color correction 
profiles in the Splash Server, see “Color Profile 
Selection” on page 51.

This option causes CMYK press color correction to 
be applied such that the original GCR settings of the 
CMYK data are preserved. This option only affects 
color matching with new style 4D profiles. Old style 
profiles are automatically GCR preserving.

The Splash server can simulate PANTONE, Toyo, 
HKS, or DIC spot colors and tints in documents.

To use this feature, select Enable in the Composite 
Spot Color Correction menu at the printer driver. The 
Splash server produces output that simulates the spot 
color on a printing press.