Xerox DocuColor 12 Printer with Splash G630 用户指南
Splash Server Preferences
Splash G630 User Guide
57
described in the sections that follow. Click OK to
apply changes to the Splash server.
apply changes to the Splash server.
Setting the Server Preferences
In the Preferences window, click on Server to open
the server preferences window. The server preferences
window gives access to the settings described below.
the server preferences window. The server preferences
window gives access to the settings described below.
Naming the Server
The Server name appears to remote clients who
connect to the Splash server over an AppleTalk
network. “Splash Server” is the default name for the
Splash server. You must change the name of the server
if you have more than one Splash server connected to
the same network zone.
connect to the Splash server over an AppleTalk
network. “Splash Server” is the default name for the
Splash server. You must change the name of the server
if you have more than one Splash server connected to
the same network zone.
To change the server name, type a unique name in the
Server Name field. Give the Splash server a name
that clearly indicates that it is a color printer. If you
assign a duplicate name, an error message appears,
prompting to enter a different name. The maximum
number of characters for the server name is 31.
Server Name field. Give the Splash server a name
that clearly indicates that it is a color printer. If you
assign a duplicate name, an error message appears,
prompting to enter a different name. The maximum
number of characters for the server name is 31.
Job Processing Preferences
Splash Server Preferences provides the following
options for processing print jobs:
options for processing print jobs:
•
Select the Always Hold Incoming Jobs check
box to place a temporary hold on all print jobs
received by the Splash server. Incoming jobs go to the
received by the Splash server. Incoming jobs go to the
bottom of the Hold queue and do not RIP or print.
This allows a server administrator to review all jobs
before they print.
This allows a server administrator to review all jobs
before they print.
•
Select Handle EPS Files as PostScript Files to
interpret EPS files as PostScript. In general, you
should not select this. It should be used in cases where
a PostScript file with an EPS header cannot be
interpreted properly. For example, if a blank page is
printed when you drop-print an EPS file.
should not select this. It should be used in cases where
a PostScript file with an EPS header cannot be
interpreted properly. For example, if a blank page is
printed when you drop-print an EPS file.
•
Error Timeout specifies how long server
processing waits when an error occurs during a print
job. If the error condition is not corrected within the
time limit specified, the server transfers the job to the
Error queue. Increase or decrease the time-out by
minute increments. The minimum is one minute. If
the Error Timeout is set to zero minutes, no error
occurs.
job. If the error condition is not corrected within the
time limit specified, the server transfers the job to the
Error queue. Increase or decrease the time-out by
minute increments. The minimum is one minute. If
the Error Timeout is set to zero minutes, no error
occurs.
Setting Page Preferences
Click Page at the top of the Preferences window to
view page options for the Splash server.
view page options for the Splash server.
•
Select the Print Cover Page checkbox to print a
standard cover page to the top output tray as the final
page for jobs that print from any tray.
page for jobs that print from any tray.
Cover page information includes the following:
•
date and time printed
•
print job owner’s name
!
Important! Do not modify server preferences
when printing is in progress at the
server. Doing so could cause
unexpected results in the printed
output.
server. Doing so could cause
unexpected results in the printed
output.
Note!
When this server preference is
selected, each print job received
by the server must be dragged
from the Hold queue to the
Waiting queue to print.
selected, each print job received
by the server must be dragged
from the Hold queue to the
Waiting queue to print.