Xerox DocuColor 12 Printer with Splash G630 用户指南

Splash Color Correction

Splash G630 User Guide 

When Secure Access is configured at the Splash 
server, users must install the Secure Access print 
driver provided with the Splash server. To install, see 
Chapters 3 and 4.

Printing using the Secure Access driver is exactly the 
same as printing with the standard driver except that 
the driver will prompt for Secure Access information. 
Other job options work exactly the same.

On the first print to a particular printer, the Secure 
Access driver will prompt for the IP address of the 
server. This should be obtained from the system 
administrator.

On every print, the Secure Access driver will prompt 
for the required information as set up at the Splash 
server. If the information entered is not correct, the 
driver will prompt to re-enter the correct information, 
specifying what entry was first found to be wrong, 
along with the error message set up at the server. This 
continues until correct information is entered or 
Cancel is selected. Once correct information is 
entered, the job prints as with the standard driver.

Jobs that error can be edited at the server to correct 
the required fields. To edit the jobs, select Edit Job 
from the menu or double-click on the job, then select 
the Edit Doc Info button on the Info pane. The server 
does not validate the information entered in the Edit 
Doc Info window until the job is released from hold.

Any job printed from the standard driver to a server 
with Secure Access enabled will error at the server 
unless the UserID, Password, and Account Number 
are entered in the Info window of the print driver. Jobs 
that error can be edited and printed at the server.

Any job printed using the Splash PageMaker PPD or 
any non-Splash print driver to a server with Secure 
Access enabled will error at the server. Jobs that error 
can be edited and printed at the server.

If an IP address that doesn’t match a Splash server is 
entered in the Secure Access driver, the driver will 
display an error message and prompt for a new IP 
address. The Secure Access driver will not allow 
printing until a valid IP address is entered.

All UserIDs must consist solely of alphanumeric 
characters. Passwords must consist solely of 
alphanumeric characters.

If a user is deleted, jobs with that UserID will no 
longer print even if they are already spooled at the 
server unless verification of UserIDs is disabled.