Xerox DocuColor 12 Printer with Matchprint Professional Server 文件

                     

     1

Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.

 

· 

The physical installation of the KPG Matchprint Professional Server
(MPS) is done by the Delivery / Removal Carrier.

·  The customer will be responsible to verify the connection of the

MPS to the DocuColor 12 Printer with simple instructions that are
provided by the D/R Carrier.  The Quick Start contains information
on how to quickly begin using your Matchprint Professional Server.

· 

Network Installation and configuration of this MPS on the network is
a customer responsibility.  Xerox Analysts support is available on a
fee basis.

· 

Periodically, Xerox will make available new software releases  that
will be customer installable.  It will be the customer’s responsibility
to perform the software upgrade activities.

·  The Xerox Customer Support Centers are available to provide

general information, answer questions, and take service calls.  You
can reach the Customer Support Center at the following toll-free
phone numbers:

Please be prepared to provide both serial numbers for the MPS and
the DocuColor 12.

·  A variety of services are available from your Xerox Systems

Analyst. All services are billable. Please contact your Sales
Representative for more information

.

· 

Customer Training is available on the KPG Matchprint Professional
Server. All training is on a fee basis. Please contact your Sales
Representative for more information.

·  With your unique nine digit customer number for the KPG

Matchprint Professional Server, you may order the KPG Matchprint
Co-Branded Xerox Color Laser Proofing Papers that are integral to
creation of the value added output.  You will obtain this customer
number from your Xerox Sales Representative at the time of your
initial order.  Keep this number for future reference.

· 

The KPG Matchprint Professional Server is shipped with Hardware
Installation and Quick Start guides to start using the MPS promptly.

· 

A comprehensive User Guide is including in the Software installed
on the MPS as received.  It may be printed for hard copy reference.

 

 

The following diagram is intended only as a representation of the
installation requirements of a fully configured DocuColor 12 with the KPG
Matchprint Professional Server.

 

 2”  (48 mm)

24” (310 mm)

30” (720 mm)

36”  (914 mm)

2”  (48 mm)

24” (310 mm)

30” (720 mm)

Work Surface

or server

From left side

36”  (914 mm)

Work Surface

or server

From left side

24” (310 mm)

Note:  The server dimensions shown below are in inches and are
minimum required values.

 

 

Voltage

 

100 to 125 / 200 to 240 VAC

RMS, single phase,

automatically configured

 

Amperage

 

15

 

Cycles (single phase)

 

60 Hz, single phase

 

Xerox Receptacle Part No.

 

600S3704

 

Receptacle NEMA Part No.

 

5-15R

 

Receptacle Diagram

 

Power

 

100 W maximum

Note:

 

·  Surge protection is required for all MPS (CPU+Monitor)

installations.  If Xerox supplied a surge protector then it must be
used to assure product warranties and support.

·  The power source for the MPS must be continuous and not

interrupted by an on-site power failure.

· 

Electrical requirements and space requirements must be satisfied
prior to equipment delivery.

·  The Deliver / Removal Carrier physically installs the KPG

Matchprint Professional Server. The customer is responsible for
configuring the MPS to the network.

· 

The work surface of the MPS must not infringe on the space
required by the DocuColor 12 and any attached accessories unless
the work surface is a table that has wheels and can be easily
moved.  Refer to the DocuColor 12 Customer Expectations Setting
Document.

 

 

 

 

 

Operating Temperature

 

 68 

o

 F (10

o

 C)

 

90 

o

 F (40

o

 C)

 

Humidity (non-condensing)

 

5% RH

 

95%  RH

 

Altitude (above sea level)

 

0

 

10,000 ft.

 

(3,048 m)

 

Order supplies from the Xerox Supplies Marketing Center, 1-800-822-
2200.  Supply items for the KPG MPS proofing Solution are 12x18 inch
KPG Matchprint Co-Branded Xerox Color Laser Proofing Papers.

 

 

 

 

Commercial

 

3R12266

 

100 sheets

 

Superwhite

 

3R12267

 

100 sheets

 

Publication

 

3R12271

 

100 sheets

 

 

 

NOTE:  The Photo Glossy paper is packaged in a sealed box that also
contains a re-sealable plastic bag.  Once the box is opened the box and
unused paper should be stored inside of the sealed plastic bag to protect
it from moisture in the air.

 

 

For more detailed information on throughput materials, please refer to
the Xerox Materials Usage Guide and the associated Recommended
Materials listing for the DocuColor 12.

 

 

KPG Matchprint Co-Branded Xerox Color Laser Proofing Papers
designed for the KPG Matchprint Professional Server system is
considered extra heavyweight paper and must be fed from Tray 5 (the
Multiple Sheet Inserter or By-Pass Tray) only.