Xerox DocuColor 12 Printer with Splash G620 用户指南
Splash G620 User Manual v2.0
96
Splash Color Correction Notes
PN: 0016964-0101
Splash Color Correction Notes
•
If you use Quark XPress, you must disable EFICOLOR before you can print with Splash RGB
color correction. To do this, remove either the “EfiColor Processor” file from the MacOS
System folder, or the “EfiColor XTension” from the Quark XPress application folder.
color correction. To do this, remove either the “EfiColor Processor” file from the MacOS
System folder, or the “EfiColor XTension” from the Quark XPress application folder.
Splash Server Notes
Increasing the Print Queue Capacity
The Splash server application memory configuration allows up to 200 jobs in the print queues, all
queues combined. When this limit is exceeded, NetWare, Drop Folder, and TCP/IP jobs will be
received but not displayed or processed by the server.
queues combined. When this limit is exceeded, NetWare, Drop Folder, and TCP/IP jobs will be
received but not displayed or processed by the server.
To increase the number of jobs the Server application can manage in the print queues, allocate
additional system memory to the Splash server application. Print jobs each take about 10K of
memory, so to manage an additional 100 jobs in the print queues, for example, you must increase
memory for the Splash server application by 1MB.
additional system memory to the Splash server application. Print jobs each take about 10K of
memory, so to manage an additional 100 jobs in the print queues, for example, you must increase
memory for the Splash server application by 1MB.
To allocate additional memory to the Splash server application:
1.
Quit the Splash server application.
2.
Click the Splash server icon to select it, then choose Get Info from the File menu in the MacOS
Finder. The Splash server Info dialog box appears.
Finder. The Splash server Info dialog box appears.
3.
Under “Memory Requirements” increase both the “Minimum Size” and the “Preferred Size”
amounts, then close the Info dialog box.
amounts, then close the Info dialog box.
4.
Open the Splash server application to resume print job processing.
When the Splash server runs out of system memory it stops receiving jobs and may report PostScript
errors for processing jobs.
errors for processing jobs.
Disable Type Reunion Extension
If the Type Reunion extension is installed on the Splash server, disable it. This extension can cause
the server to quit unexpectedly.
the server to quit unexpectedly.
Running Other Applications on the Splash Server
Before using other applications on the Splash server computer, click the Stop button at the bottom of
the Splash server window. If the Splash server is running, other applications operate at reduced
performance levels. When processing is stopped, you can still print to the Xerox DocuColor 12
Copier/Printer from the Splash server computer (local printing). When you have finished using other
applications, exit these applications and click Go to continue Splash print processing. Any jobs sent
to the Server will then begin to print.
the Splash server window. If the Splash server is running, other applications operate at reduced
performance levels. When processing is stopped, you can still print to the Xerox DocuColor 12
Copier/Printer from the Splash server computer (local printing). When you have finished using other
applications, exit these applications and click Go to continue Splash print processing. Any jobs sent
to the Server will then begin to print.
!
Important! Disabling EFICOLOR correction in the Quark XPress application is not sufficient. Quark XPress
converts all RGB data to CMYK using EFICOLOR color correction, even if EFICOLOR is disabled
in the application. You must remove one of the two EFICOLOR files to prevent EFICOLOR from
interfering with Splash Color Correction.
in the application. You must remove one of the two EFICOLOR files to prevent EFICOLOR from
interfering with Splash Color Correction.