Xerox DocuColor 12 Printer with Splash G620 用户指南

•

The Splash server is external to the Xerox DocuColor 12 Copier/Printer.

•

The Splash server is based on a Power Macintosh host running the MacOS 9.0 or later operating 
system.

•

The Splash server is designed for use only with the Xerox DocuColor 12 Copier/Printer. The 
Splash server does not support other configurations.

Qualified technicians will unpack, assemble, and connect all components included with Splash’s 
turnkey server. For instructions to install any of Splash Technology’s board kits, please follow the 
installation instructions included in that kit.

The Splash Key is a hardware device that connects to theADB/USB port on your computer. The 
Splash Key prevents unauthorized use of the Splash server software and provides maximum security 
by locking the Splash server application if the key is removed.

Install the Splash Key as follows:

Shut down the Splash server.

Apple G3 servers: connect the small end of the Splash Key to 
the ADB port on the back of the server.
Apple G4 servers: connect the small end of the Splash Key to 
the USB port on the back of the server. 

Start the computer.

The Splash server application operates only when the Splash Key is 
connected to the USB port. To prevent unauthorized printing, 
remove the Splash Key from the USB port. The Splash server 
application locks until the Splash Key is replaced.

USB Port