Xerox DocuColor 12 Printer with Splash G620 用户指南
Splash G620 User Manual v2.0
16
TCP/IP Direct Printing to the Splash Server
PN: 0016964-0101
Configuring the Server/Network Connection
Before beginning this procedure, obtain a static Internet address and subnet mask number, if needed,
from your network administrator.
from your network administrator.
Prepare an Internet address for the Splash server in the TCP/IP control panel. Assign the Splash
server a static Internet address so clients can reliably locate the Splash server on the network. A
static IP address is required for the server to use the Splash Web Queue Manager option.
server a static Internet address so clients can reliably locate the Splash server on the network. A
static IP address is required for the server to use the Splash Web Queue Manager option.
Configure an Internet address for the Splash server as follows:
1.
At the Splash server, point to Control Panels in the Apple menu, then select TCP/IP in the
submenu.
submenu.
The TCP/IP control panel appears.
2.
Choose the network connection type for the Splash server’s TCP/IP network in the Connect via
menu.
menu.
3.
Select Manually in the Configure menu.
4.
Enter the IP Address for the Splash server.
5.
Enter a Subnet mask number if needed. A subnet mask provides additional address information
for some networks.
for some networks.
6.
Enter the Router address if needed. A network router maintains a list of IP addresses for two or
more groups of network devices. The router then uses the list of addresses to direct network data
to the appropriate location on the network. To enter two or more router addresses, press the
Return key after entering each address.
more groups of network devices. The router then uses the list of addresses to direct network data
to the appropriate location on the network. To enter two or more router addresses, press the
Return key after entering each address.
7.
Enter a Name server address for the DNS server on your network; for example,
design.corp.com.
design.corp.com.
8.
Close the TCP/IP control panel. A dialog box prompts to confirm the new setup.
9.
Click OK.
The system can now enable TCP/IP printing for the Splash server.