Xerox DocuColor 12 Printer with Matchprint Professional Server 产品宣传页

Imation Matchprint™ Professional Server V2.0.3 Installation Instructions

Imation Corp. 

2002, June 26

Page 11

The V2.0.3 version number only appears on the first Calibration window. To make sure
the 2.0.3 is loaded, check the version number as shown in the following steps:

1.  Launch the IMPS software.

2. Go to Printer > Add printer. Setup the printer parameters.

3. Click OK.

4.  Reselect the Printer just added. (Go to Printer and select the printer from the drop-

down list.)

5.  Click on the Calibration button and select Perform Printer Calibration. The

Calibration window appears as follows with the V2.0.3 in the upper-right corner of
the window:

1.  Put the Saved RIP Configuration diskette into the drive.

2. Go to Start>Programs>Imation>Imation Save RIP Configurations.

3. Click on Restore Configurations, then follow the prompts to restore settings.

4.  Using Windows NT Explorer manually restore individual custom ICC Profiles and

adjusted Device Links from the Program Files/Imation/Imation Matchprint
Professional Server/temp to the proper folders.

Version
number