Xerox DocuColor 12 Printer with Fiery X12 安装指南
19
Setting up PostScript and/or PCL printing with Windows 95/98
5.
If you are using a NetWare file server, double-click the icon of the NetWare file server
you want to use for printing to the Fiery.
you want to use for printing to the Fiery.
6.
Click the printer icon labeled with the NetWare print queue you will use and click OK.
7.
In the Add Port dialog box, verify that the network path is updated and click OK.
Your print jobs are transmitted to the specified print queue on the Novell file server.
The Fiery polls the file server, and if jobs are present, they are transmitted to the Fiery.
The Fiery polls the file server, and if jobs are present, they are transmitted to the Fiery.
To confirm the connection, print a Windows 95/98 test page.
8.
Click the General tab, click Apply, and click Print Test Page.
If the test page prints successfully, you are ready to print from the computer.
Setting up SMB printing on Windows 95/98
If you don’t have a Novell network, you can print via SMB printing (also known as
Windows printing or WINS printing). Printing by this method allows you to install
the PostScript or PCL printer driver and printer description files, and print from your
computer to a particular connection (Hold, Print, or Direct) on the Fiery. These
instructions assume you have the TCP/IP protocol and Client for Microsoft Networks
installed.
Windows printing or WINS printing). Printing by this method allows you to install
the PostScript or PCL printer driver and printer description files, and print from your
computer to a particular connection (Hold, Print, or Direct) on the Fiery. These
instructions assume you have the TCP/IP protocol and Client for Microsoft Networks
installed.
To set up printing to a second or third print connection, you must install a new printer
driver and PPD or PDD file. Repeat the procedure “To set up SMB printing on
Windows 95/98:” on page 20. If you install more than one printer, give each a
descriptive name during printer driver installation, such as
driver and PPD or PDD file. Repeat the procedure “To set up SMB printing on
Windows 95/98:” on page 20. If you install more than one printer, give each a
descriptive name during printer driver installation, such as
Aero-Print
or
Aero-Hold
, so
you can easily identify printers.
B
EFORE
YOU
BEGIN
:
1.
Configure the Fiery for SMB printing in Network Setup>Service Setup>Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map,
and on the Configuration page. For more information, see the Configuration Guide.
and on the Configuration page. For more information, see the Configuration Guide.
2.
Specify whether to install the PS or PCL printer driver using Point and Print in Network
Setup>Service Setup>Windows Setup>Point and Print Drivers.
Setup>Service Setup>Windows Setup>Point and Print Drivers.