Xerox DocuColor 12 Printer with Fiery X12 安装指南
22
Installing User Software on a Windows Computer
7.
Using a maximum of 31 characters, enter a name for the Fiery (or leave the default
name) in the Printer name box, and choose whether you want the Fiery to be your
default printer. Click Next.
name) in the Printer name box, and choose whether you want the Fiery to be your
default printer. Click Next.
N
OTE
:
Entering more than 31 characters may cause printing problems with some
network applications.
8.
You are asked if you would like to print a test page. Choose Yes and click Finish.
The necessary files are installed to your hard disk.
If the test page prints successfully, you are ready to print from the computer.
Setting up PostScript and/or PCL printing with
Windows NT 4.0
Windows NT 4.0
To set up the Fiery as a PostScript or PCL printer, you must install the PostScript or
PCL Printer Driver for Windows NT 4.0 and its corresponding printer description
files. You must also configure a particular type of print connection between the
workstation and the Fiery. If you are printing over a network, you will need to
configure a network connection; if you are printing directly to the printer you will
need to configure a parallel port connection.
PCL Printer Driver for Windows NT 4.0 and its corresponding printer description
files. You must also configure a particular type of print connection between the
workstation and the Fiery. If you are printing over a network, you will need to
configure a network connection; if you are printing directly to the printer you will
need to configure a parallel port connection.
The instructions below describe installing a printer locally. Adding a printer to a local
system requires that you log in to your local Windows NT workstation (not the
network server domain) and that you are a member of the Administrators group. The
system requires that you log in to your local Windows NT workstation (not the
network server domain) and that you are a member of the Administrators group. The