Xerox DocuColor 12 Printer with Fiery X12 安装指南
5
5-9
Support for Fiery utilities
•
For Windows NT 4.0, install the appropriate printer driver files (PCL or PostScript) on
the Windows NT 4.0 server (see Getting Started).
the Windows NT 4.0 server (see Getting Started).
•
Repeat the installation for everyone who prints to the Fiery.
Each server and workstation running the Fiery utilities with TCP/IP also needs the
TCP/IP protocol and the Fiery utility software.
TCP/IP protocol and the Fiery utility software.
Configuring a Windows NT 4.0 server to support the Fiery
To configure a Windows NT 4.0 server to communicate with the Fiery, follow these
general steps. More detail is provided in subsequent sections and in your Microsoft
documentation.
general steps. More detail is provided in subsequent sections and in your Microsoft
documentation.
• Load the TCP/IP network protocol on the server and configure it with an
IP address, subnet mask, and gateway.
• Enter the host name of the Fiery in the host database used by your system (see
• Perform Fiery Setup.
• On the Windows NT 4.0 server, create a printer for each Fiery print connection,
install the appropriate printer drivers and (optionally) share the printer on the net-
work (see page 5-11).
work (see page 5-11).
• Enter the host name and remote printer name of the Fiery in the printer connection.
See page 5-15 for more information.
• If the Windows NT 4.0 server is also a workstation, install the Fiery utilities (see
Getting Started).