Xerox DocuColor 12 Printer with Fiery X12 安装指南
3
3-4
Performing Setup from the Control Panel
T
O
ACCESS
S
ETUP
WHEN
THE
F
IERY
IS
AT
I
DLE
:
About the Control Panel Setup interface
When you perform Setup from the Control Panel, you select one menu after another
and enter information about your Fiery and your network and printing environment.
and enter information about your Fiery and your network and printing environment.
In each Setup screen, the last line of the display window shows the name of the current
Setup menu. Most of the menus you see are shown on the Control Panel Map, a
flowchart that can be printed from the Control Panel.
Setup menu. Most of the menus you see are shown on the Control Panel Map, a
flowchart that can be printed from the Control Panel.
1.
Make sure the information screen on the Control Panel reads Idle.
If Printing or RIPping appears, the Fiery is processing, and you must wait until
the system finishes and reaches the Idle state.
the system finishes and reaches the Idle state.
2.
Press the Menu button on the Control Panel to go to the Functions menu.
3.
Scroll with the down arrow and press the line selection button next to Run Setup.
If an Administrator password has been set on the Fiery, you are prompted to enter
it before you can perform Setup (see page 3-45).
it before you can perform Setup (see page 3-45).
4.
When prompted to confirm your choice, press the line selection button next to OK.
5.
Press the line selection button to choose a Setup menu or command.
Press the down button to view the remaining screens of the main Setup menu.
6.
Perform, in order, Server Setup, Network Setup, and Printer Setup.
This is the minimum required for initial Setup. Later, you can complete the
remaining Setups either from the Control Panel or from a Windows computer.
remaining Setups either from the Control Panel or from a Windows computer.
7.
Set an Administrator password to protect your Setup from unauthorized alteration.
Review the settings described in this chapter. For more information on calibration
and Control Panel menus other than those in Setup, see the Job Management
Guide.
and Control Panel menus other than those in Setup, see the Job Management
Guide.
Exit Setup
Server Setup
Network Setup
Printer Setup
Server Setup
Network Setup
Printer Setup
Setup
PS Setup
PCL Setup
Color Setup
Job Log Setup
PCL Setup
Color Setup
Job Log Setup
Setup
Change Password
Font Archiving
Font Archiving
Setup