Xerox DocuColor 12 Printer with Fiery X12 安装指南
4
4-11
General Setup options
Protocols
You can change AppleTalk, IPX/SPX, and TCP/IP protocol settings for the Fiery.
From remote Setup, you change these settings on the Protocol1 and Protocol2 tabs.
Local Setup works in conjunction with the Windows NT 4.0 Network Control Panel.
When you click the Modify or Advanced button next to the setting in local Setup, the
system opens the Network Control Panel, where you complete the settings.
From remote Setup, you change these settings on the Protocol1 and Protocol2 tabs.
Local Setup works in conjunction with the Windows NT 4.0 Network Control Panel.
When you click the Modify or Advanced button next to the setting in local Setup, the
system opens the Network Control Panel, where you complete the settings.
Unlike remote Setup, local Setup does not provide separate settings to enable a
protocol and to configure it. For example, remote Setup has two settings for
AppleTalk: one to enable AppleTalk, and the other to set the AppleTalk zone. In local
Setup, there is only the setting for AppleTalk zone. By default, the AppleTalk,
IPX/SPX, and TCP/IP protocols are installed and enabled. You can verify a protocol is
enabled in the Bindings tab of the Network Control Panel.
protocol and to configure it. For example, remote Setup has two settings for
AppleTalk: one to enable AppleTalk, and the other to set the AppleTalk zone. In local
Setup, there is only the setting for AppleTalk zone. By default, the AppleTalk,
IPX/SPX, and TCP/IP protocols are installed and enabled. You can verify a protocol is
enabled in the Bindings tab of the Network Control Panel.