Xerox DocuColor 12 Printer with Fiery X12 产品宣传页

下载
页码 208
1
1-9
Starting and shutting down the Fiery
Shutting down the Fiery
You may need to shut down the Fiery for service. When you do so, fonts that have 
been downloaded to the hard disk drive are not deleted. Print jobs in the Hold and 
Printed queues and jobs that have been processed but not printed are not deleted and 
are available for printing when you restart the Fiery.
T
O
 
SHUT
 
DOWN
 
THE
 F
IERY
:
1.
Make sure that the Fiery is not receiving, processing, or printing a job.
Make sure that the status message on the Control Panel is Idle. If a job has just finished 
processing or printing, wait at least five seconds after the Control Panel status message 
changes to Idle before proceeding.
N
OTE
:
If the Fiery is restarted when jobs are waiting to RIP or print, these jobs are 
moved to the Hold queue. Once the server is restarted, you must select these jobs in 
the Hold queue and select RIP and Hold, Print, or Print and Hold from the Job menu.
2.
Press the Menu button to display the Functions menu.
3.
Use the down button to scroll to the last screen and choose Shut Down.
4.
Use the line selection button to choose Shut Down System.
Proceed to the next step when the screen displays the message, “It is now safe to power 
off the server.”
5.
Power off the Fiery by moving the power switch on the back to the Off position.
N
OTE
:
After powering off the Fiery, make sure to also power off the copier. Leaving the 
copier powered on while the Fiery is powered off can lead to excessive drain on the 
Fiery motherboard battery.