Xerox DocuColor 12 Printer with Fiery X12 产品宣传页

The job icons in the Print area are described below:

The Print area, also referred to as the Printed queue, contains jobs that have already 
been printed. These jobs were assigned the Print destination (white printer icon in the 
Spool or RIP areas) without any Hold instructions; therefore, they all have white icons 
and rows.

A job row that appears in light red indicates that an error occurred while 

printing the job. To see the error, double-click anywhere in the row.

Newly printed jobs are added to the Printed queue, and are shown at the top of the list. 
Jobs are saved in the Printed queue until the job limit is reached. When the first job 
over the limit is printed, the oldest job is deleted from the disk. The default job limit is 
10 jobs. The value for J

obs Saved in Printed Queue

 can be changed in Setup by the 

administrator.

If you reprint a job in the Printed queue, the job returns to its original position 

in the Printed queue after it is printed.

While it is printing, a job consists of PostScript or PCL and raster data. The raster data 
in RAM is not cleared until memory is needed to rasterize the next job. As long as the 
raster data is intact, the job can be reprinted from the Printed queue. Printed jobs that 
still have their raster data are represented by a white raster icon in the Printed queue 
(icon 2 in the previous table); jobs with only PostScript or PCL data remaining are 

White printer icon 

White job row 

PostScript or PCL data 
only—raster data has been 
deleted

Until the job limit is reached

White raster icon 

White job row 

Raster, PCL, and PostScript 
data

If RAM is needed to RIP an 
active job, the raster data is 
deleted and the job gets the 
PS icon (icon 1, above)

Until the job is reprinted or 
the job limit is reached