Xerox DocuColor 12 Printer with Fiery X12 产品宣传页

To combine a variable-elements job with a FreeForm Master, the variable-elements job 
must be RIPped with the Use Master print option set to the number of the 
corresponding FreeForm Master. As with the Create Master print option setting, users 
can set this option to a value from 1 to 15 only. To specify a number greater than 15, 
you must override the Use Master job setting from the Properties dialog box and RIP 
(or reRIP) the job.

The FreeForm window displays up to 100 FreeForm masters that can be used for 
variable data jobs. However, users on the network can specify Create Master job setting 
values of 1 through 15 only, due to limitations of the printer driver interface.

The Create Master job setting values can range from 1 to 100, but values from 16 to 
100 can be assigned only with job overrides from the Properties dialog box. When 
assigning new FreeForm Master numbers, it is very important to not choose a number 
already in use; doing so may result in the original FreeForm Master being overwritten.

Only white raster data icons appear in the FreeForm window, as all FreeForm Masters 
have already been rasterized. Their raster data is kept indefinitely until the FreeForm 
Master is deleted.

For all rasterized jobs, the print option settings, in addition to the Fiery’s current 

calibration state, remain with the saved raster data each time the job is reprinted. To 
print the job with new print option settings and with new calibration data, you must 
remove the raster data and reRIP the job.