Xerox DocuColor 12 Printer with Fiery X12 产品宣传页

The following sections provide additional information about print options. See the 
table above for information on the settings, requirements, and constraints in effect for 
these options.

—Select if your job consists of black-only text pages combined with a significant 

number of color pages. Doing so will prevent the copier from having to cycle down 
each time between printing the black only pages and color pages.

—Select when you are printing a predominantly black and white job. The Fiery 

speeds printing by sensing the data on each page of your job to detect any color 
information; if black is the only color detected on a page, the copier will print the page 
using only black toner and one print cycle instead of the four cycles necessary for color 
printing.

When printing black text in combination with a color background or graphics, the text 
can be printed in one of two ways: either as part of the color background, or on top of 
the color background. Black Overprint allows you to choose a specific way to print the 
black text for such a job.

—Prints the black text with knockouts. The Fiery first prints the color background 

with the black text areas ‘knocked out’ (no color is printed in the text areas); the black 
text is then printed in the knocked out area, filling in the areas not printed in color. 
The result is a flatter appearance for the black text.

For variable data print jobs, specify a 
FreeForm master number to be used for 
the job.

This option is also available for Fiery X12 
servers equipped with the optional Fiery 
Advanced Controller Interface kit.
See page 4-2 for more information.
Use Master is not available for PCL 
printing.

XP

XP

12