Xerox DocuColor 12 Printer with Fiery X12 产品宣传页

•

converts all RGB colors into the CMYK color space of your copier (when the 

Output Profile option is set to Printer’s default), or a customized CMYK color space 
for your copier (when the Output Profile option is set to Output 1-10).

•

converts all RGB colors into the CMYK color space for a specified 

simulation (make sure to select the desired simulation with the CMYK Simulation 
Profile print option).

This feature is not available with the PCL driver.

The CMYK Simulation Profile print option allows you to print press proofs or 
simulations. This setting specifies the offset press standard or other color printing 
device that you want to simulate. This option affects CMYK data only. 

The CMYK Simulation Profile setting you should specify depends on the press 
standard for which the CMYK data was separated. 

• For images that were separated using a custom separation (such as a separation 

produced with an ICC profile), choose the corresponding profile on the Fiery with 
the CMYK Simulation Profile setting. 

• For images that were separated for SWOP, choose SWOP as the CMYK Simulation 

Profile setting. 

To properly simulate a printed image that was separated through the use of an 

ICC profile, the same profile must be present on the Fiery. For more information 
about downloading ICC profiles to the Fiery, see “Downloading profiles” on page 4-5.

• The Match Copy setting bypasses Fiery calibration to simulate the color of a copy 

produced by the copier. Use this setting when you print images scanned with the 
Fiery Scan plug-in set to Match Copy.

This feature is not available with the PCL driver.