Xerox ColorQube 8580 管理员指南
Network Connectivity
Xerox
®
ColorQube 8580/8880 Color Printer
29
System Administrator Guide
SLP
Printers use Service Location Protocol (SLP) to announce and look up services on a local network without
prior configuration. When SLP is enabled, the printer becomes a Service Agent (SA) and announces its
services to User Agents (UA) on the network using SLP. If Directory Agents (DA) exist on the network,
they provide a cache for services information. When Directory Agent Discovery is enabled, the printer
attempts SLP Directory Agent Discovery.
1.
1.
In CentreWare Internet Services, click Properties > Protocols.
2.
Click SLP.
3.
For SLP Enable, select On.
4.
To configure the printer to search for discovery agents, for Directory Agent Discovery Enable, select
On.
5.
For Directory Agent, type the name of the directory agent. To discover one or more directory agents,
leave the field blank.
6.
For Scope 1, 2, and 3, type a name as needed. When scope fields are empty and DHCP Option 79 is
configured on the DHCP server, the printer uses scopes that are specified in Option 79.
7.
For SLP Multicast Enable, select an option.
−
On: The printer uses multicast to communicate as needed.
−
Off: The printer uses broadcast instead of multicast to communicate.
8.
To specify the multicast radius, for SLP Multicast TTL, type a value from 0–255. Multicast radius is
also referred to as hop count or time-to-live (TTL).
9.
To specify the maximum packet size that the printer can transmit for UDP, for SLP MTU, type a
value from 484–1400. When packets exceed the maximum size, the printer uses TCP/IP.
10.
Click Save Changes.