Xerox CentreDirect External Print Server Support & Software 用户指南

下载
页码 37
Printer Upgrade
CENTREWARE DP USER GUIDE
31
Printer Upgrade
Overview
Many of the printers which CentreWare DP supports are 
equipped with Flash ROM on the Main Controller card 
and/or the Network Interface Card.
Flash ROM enables you to upgrade the “firmware” of your 
printer without having to physically remove and replace 
the ROMs.
You should consult your printer documentation to 
determine if your printer is equipped with Flash ROM and 
on which card.  Also, some printer model supported by 
CentreWare DP may require the upgrade printer function 
only be performed while connected to the serial or 
parallel port of the printer.
CentreWare DP makes the upgrade process easy.  Follow 
the procedure below to quickly update your printer 
software.
Procedure
This procedure requires special upgrade file(s) for each 
type of printer.  You may obtain these files either from the 
Xerox Web Site (www.xerox.com), or on a floppy disk.  
Obtain the upgrade file for your printer, copy it to a 
workstation hard drive, and record the path (drive and 
directory) to which it was copied.
1
Start CentreWare DP from your workstation.
2
Select the desired printer or External Ethernet Adapter
3
Select the Tools menu.
In Step 3 below, if the Upgrade Printer entry is not enabled 
(grayed-out) the selected printer requires direct connection 
(serial or parallel port) to be upgraded or is not equipped with 
Flash ROM