Craftsman T825011L 用户手册

IMPORTANT: BEFORE FIRST USE, perform the following Air Purge Procedure to remove any air 

that may have been introduced into the hydraulic system as a result of product shipment and 

handling.

Screwdriver

Turn handle clockwise until it 

stops to ensure that release 

valve is closed.

With a flat blade screwdriver, 

push the oil fill plug slightly to 

the side to purge trapped air 

from system. 

Turn the handle clockwise until it 

stops.

Rapidly pump the handle 6 - 8 times. 

Leave handle in down position to 

expose oil fill plug.   

Jack is now ready for use. Check 

for proper pump action. 

See ASSEMBLY on page 3 to assemble 

handle. Loosen handle socket screw. 

Insert end of handle into handle socket.

Tighten screw.

Turn handle counterclockwise 

2 full turns to fully open 

release valve.

10 am - 7 pm, Central Time,

NOTE: Repeat this Air Purge Procedure whenever 

the jack displays reduced lifting performance.

Oil Fill Plug