Honeywell HE360 安装指南

下载
页码 24
® U.S. Registered Trademark
Copyright © 2002 Honeywell •   
 •All Rights Reserved 
INSTALLATION INSTRUCTIONS/OWNER’S GUIDE
69-1646EF-01
 HE360 Humidifier and
Installation Kit
WELCOME
To the comfortable world of humidified air. When you use 
your Honeywell humidifier, notice that your skin is not as 
dry, and that your scratchy throat and irritated nasal 
passages that aggravate allergies and asthma are 
steadily improving.
You have also taken the first step in reducing the zapping 
you create when you walk on your carpet and then touch 
your TV, computer, metal door knob or your pet. Your 
furniture and woodwork are also benefitting from the 
difference that humidified air makes.
Congratulations! You have just made a great investment 
in improving the comfort of your home.
APPLICATION
This kit contains your new Honeywell HE360 Humidifier, 
H8908 Humidistat and all the accessories required for 
installation. 
INSTALLATION
Preparing for the Installation
Be sure to identify all the required (Table 1) accessories 
(included) and make sure the appropriate tools are 
available before beginning the installation.
Required Accessories (Included)
Required Tools
Tools required for installation include:
• Tin snip.
• Screwdriver.
• Adjustable or open-end wrench.
• Drill, punch or awl.
• Level.
Determining Best Location for Humidifier
CAUTION
Temperature and Static Pressure Hazard.
Can cause property or equipment damage.
Locate humidifier where ambient temperature is 
between 32°F (0°C) and 160°F (71°C). 
Do not install humidifier where freezing 
temperatures could occur. 
Be sure supply plenum static pressure is no 
greater than 0.4 in. wc and water pressure is no 
greater than 124 psi.
• Select a location for the humidifier on the supply 
(warm air stream) plenum. See Fig. 1.
Table 1. Required Accessories.
Quantity
Accessory
20 ft (6.2m)
18 gauge, two-strand thermostat wire
20 ft (6.2m)
1/4 in. (6.35 mm) OD feed water tubing
10 ft (3.1m)
1/2 in (12.7 mm) ID drain tubing
1 bag
Connecting and mounting hardware:
Wire nuts (4)
No. 8 sheet metal screws (18)
Drain tube clamp
Feed tube mounting clamps (6)
Brass inserts (2)
Plastic compression rings (2)
1
Sail switch
1
H8908 Humidistat
1 bag
Saddle Valve Assembly:
Saddle valve and top clamp (1)
Threaded bottom clamp (1)
Bolts (2)
Rubber gasket (1)
Eyelet (1)
Plastic bushing (1)
Table 1. Required Accessories.
Quantity
Accessory
69-1646E-01_A.fm  Page 1  Tuesday, June 9, 2009  1:13 PM