Zanussi ZBT23420SA 用户手册

A medium setting is generally the

most suitable.

However, the exact setting should

be chosen keeping in mind that the

temperature inside the appliance

depends on:

• room temperature,

• how often the door is opened,

• the quantity of food stored,

• the location of the appliance.

1. Turn the Temperature regulator toward

lower settings to obtain the minimum

coldness.

2. Turn the Temperature regulator toward

higher settings to obtain the maximum

coldness.

If the ambient temperature is high or

the appliance is fully loaded, and the

appliance is set to the lowest

temperatures, it may run

continuously causing frost to form

on the rear wall. In this case the dial

must be set to a higher temperature

to allow automatic defrosting and

therefore reduced energy

consumption.

The walls of the refrigerator are equipped with a

series of runners so that the shelves can be

positioned as desired.

To permit storage of food packages of various

sizes, the door shelves can be placed at

different heights.
1. Gradually pull the shelf in the direction of

the arrows until it comes free

2. Reposition as required.

The freezer compartment is suitable for freezing

fresh food and storing frozen and deep-frozen

food for a long time.
To freeze fresh foods it is not necessary to

change the medium setting.
However, for a faster freezing operation, turn

the temperature regulator toward higher

settings to obtain the maximum coldness.

In this condition, the refrigerator

compartment temperature might

drop below 0°C. If this occurs reset

the temperature regulator to a

warmer setting.

Place the fresh food to be frozen in the bottom

compartment.
The maximum amount of food that can be frozen

in 24 hours is specified on the rating plate, a

label located on the inside of the appliance.
The freezing process lasts 24 hours: during this

period do not add other food to be frozen.

This appliance is equipped with one or more

trays for the production of ice-cubes.

Do not use metallic instruments to

remove the trays from the freezer.

1. Fill these trays with water

2. Put the ice trays in the freezer compartment.