Zanussi ZOB35301WK 用户手册

Always hold the halogen lamp with a

cloth to prevent grease residue from

burning on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

The side lamp

1. Remove the left shelf support to get access

to the lamp.

2. Use a narrow, blunt object (e.g. a teaspoon)

to remove the glass cover. 

3. Clean the glass cover.

4. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

5. Install the glass cover.

6. Install the left shelf support.

Refer to Safety chapters.

The oven does not heat up.

The oven is deactivated.

Activate the oven.

The oven does not heat up.

The clock is not set.

Set the clock.

The oven does not heat up.

The necessary settings are not

set.

Make sure that the settings are

correct.

The oven does not heat up.

The fuse is released.

Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

The lamp does not operate.

The lamp is defective.

Replace the lamp.

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20 mi-

nutes after the cooking process

ends.

The display shows "12.00".

There was a power cut.

Reset the clock.

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.