Zanussi ZCG43010WA 用户手册

To install the panels, do the same steps in

reverse.

The door glass in your product can

be different in type and shape from

the example you see in the image.

The number of glasses can also be

different.

1. Push the door trim at one side to remove it.

2. Pull up the trim.

3. Remove the glass panels.

To replace the glass panels, do the

same steps in reverse. Before you

lower the trim, attach the A trim part

to the door. Refer to the image.

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back

of the cavity.

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300

°C heat-resistant oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

Refer to Safety chapters.

You cannot activate the appli-

ance.

The appliance is not connected

to an electrical supply or it is

connected incorrectly.

Check if the appliance is correct-

ly connected to the electrical

supply.

You cannot activate the appli-

ance.

The fuse is blown.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.