Zanussi ZEE6140FXA 用户手册

Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure

that the appliance is disconnected from the

power supply.

• Make sure that the electrical information on

the rating plate agrees with the power

supply. If not, contact an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can make

the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot appliance

or hot cookware, when you connect the

appliance to the near sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and insulated

parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• If the mains socket is loose, do not connect

the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

Risk of injury, burns and electrical

shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings are

not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to “off” after each use.

• Do not put cutlery or saucepan lids on the

cooking zones. They can become hot.

• Do not operate the appliance with wet hands

or when it has contact with water.

• Do not use the appliance as a work surface

or as a storage surface.

• When you place food into hot oil, it may

splash.

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or heated

objects away from fats and oils when you

cook with them.

• The vapours that very hot oil releases can

cause spontaneous combustion.

• Used oil, that can contain food remnants,

can cause fire at a lower temperature than

oil used for the first time.

• Do not put flammable products or items that

are wet with flammable products in, near or

on the appliance.

Risk of damage to the appliance.

• Do not keep hot cookware on the control

panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware fall

on the appliance. The surface can be

damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Do not use the solid hot plate for direct

cooking. It must be used with appropriate

cookware.