Zanussi ZWI71209WA 用户手册
![Zanussi](https://files.manualsbrain.com/attachments/aa909dc0444e067693b2f8b844dd8cdf9c5238c4/common/fit/150/50/2ffdca950404bd46f0c3c177a000364f0331077df59e647a968e9cfc0c5c/brand_logo.jpeg)
INSTALLATION
WARNING! Refer to Safety chapters.
UNPACKING
Remove all transit bolts and packing
before you use the appliance. You are
advised to keep all transit devices so t
hat they can be refitted if the appliance
ever has to be transported again.
• After removing all the
packaging, carefully
lay the appliance on
it’s back to remove
the polystyrene base
from the bottom.
• Remove the power
supply cable and the
draining hose from the
hose holders on the
rear of the appliance.
1
2
• Unscrew the three
bolts.
• Slide out the relevant
plastic spacers.
• Remove the polystyr-
ene block fitted on the
door seal. Pull out all
items from the drum.
• Fill the smaller upper
hole and the two large
ones with the plastic
plug caps supplied in
the bag with the User
Manual.
POSITIONNING
• Install the machine on a flat hard floor. Make
• Install the machine on a flat hard floor. Make
sure that air circulation around the appliance is
not impeded by carpets, rugs etc.
• Check that the machine does not touch the wall
or other kitchen units.
• Level the appliance by
raising or lowering the
feet.
• The feet may be tight
to adjust as they in-
corporate a self lock-
ing nut, but the appli-
ance MUST be level
and stable.
• If necessary, check the setting with a spirit level.
Any necessary adjustment can be made with a
spanner.
• After having levelled
the appliance, tighten
the lock nuts.
• Accurate levelling pre-
vents vibration, noise
and displacement of
the appliance during
operation.
Never place cardboard, wood or
similar materials under the appliance
to compensate for any unevenness in
the floor.
18