Binatone JE 8500 用户手册

4

44

44

Please read the safety instructions carefully before using this

appliance. Please retain the instructions for future refer-

 Please retain the instructions for future refer-

 Please retain the instructions for future refer-

 Please retain the instructions for future refer-

 Please retain the instructions for future refer-

ence.

ence.

ence.

ence.

ence.

1. Small pusher

2. Large pusher

3. Feeder tube

4. Grater/filter

5. Pulp container

6. Anti-drip system (juice stopper)

7. Juice spout

8. Safety clamps

9. Body

10.Rubber foot

11.Driving shaft

12.Three-position switch «0/I/II»

!

Remove all packing materials from the ap-

pliance.

!

Wipe the appliance body with soft damp cloth,

thoroughly wash all the appliance parts com-

ing into contact with food.

1. Place the juice extractor on dry level surface.

Make sure than the switch (12) is in «0»

position.

2. Install the pulp container (5), by matching

the juice spout (7)  with the groove on the

body (9).

3. Put the grater/filter (4) inside the pulp container (5) so that it

completely fits into the driving shaft (11) until click. Check that

the grater/filter (4) rotates freely. Put the feeder tube (3) above.

4. Insert the feeder tube (3) into the pulp container (5) matching the

projections on the feeder tube (3) with the  safety clamps (8).

5. Lift the safety clamps (8) and put them down so that they lock on

the projections of the feeder tube (3).