Cisco Cisco Expressway 维护手册
Figure 10: Multiple deployments to partition Unified Communications services accessed from outside the
network
network
Deployments and their associated domains and services are configured on the Expressway-C.
There is one primary deployment, called "Default deployment" unless you rename it, that automatically encloses all
domains and services until you create and populate additional deployments. This primary deployment cannot be
deleted, even if it is renamed or has no members.
domains and services until you create and populate additional deployments. This primary deployment cannot be
deleted, even if it is renamed or has no members.
To partition the services that you provide via mobile and remote access, create as many deployments as you need,
associate a different domain with each, and then associate the required Unified Communications resources with
each deployment.
associate a different domain with each, and then associate the required Unified Communications resources with
each deployment.
You cannot associate one domain with more than one deployment. Similarly, each Unified Communications node
may only be associated with one deployment.
may only be associated with one deployment.
To create a new deployment:
1.
Log in to the Expressway-C.
2.
Go to Configuration > Unified Communications > Deployments and click New.
3.
Give the deployment a name and click Create deployment.
The new deployment is listed on the Deployments page and is available to select when editing domains or
UC services.
UC services.
To associate a domain with a deployment:
1.
Go to Configuration > Domains.
The domains and their associated services are listed here. The deployment column shows where the listed
domains are associated.
domains are associated.
2.
).
3.
In the Deployment field, select the deployment which will enclose this domain.
4.
Click Save.
60
Cisco Expressway Administrator Guide