Cisco Cisco PVC300 Pan Tilt Optical Zoom Internet Camera 维护手册

Installing the Software

Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE

20

Proceed to the next section to continue camera configuration.

Follow these steps to configure the camera’s network settings.

To continue configuring the camera’s network settings, click Next. The Network 
Settings screen appears.

Select one of the following options to assign an IP address to the camera:

•

Static IP address—Select this option to assign the camera a static IP 
address.

•

Automatic Configuration DHCP—Select this option to assign the camera 
an automatic IP address from a DHCP server on your network.

•

PPPoE—Select this option if using a PPPoE connection to access the 
Internet to assign the camera an automatic IP address.

Click Next to continue. The IP Setting screen appears. 

Make any changes appropriate for your camera to integrate into your network, 
then click Next to continue.

Confirm the changes you are about to make by clicking OK on the confirmation 
screen. The wizard will show an hourglass while it configures your camera.

The New Internet Camera Settings screen appears and displays the camera’s 
settings. 

Click Next to continue. A dialog box appears prompting you whether to change the 
settings.

Click OK to continue. A dialog box appears informing you that your configuration 
has been saved successfully. 

Click OK to continue. The 

Congratulations 

screen appears. 

Click Exit to automatically launch your default web browser and proceed to the 
Home page of the camera.