Cisco Cisco Catalyst 6500 Series 7600 Series Wireless Services Module (WiSM) 故障排查指南
Configure RADIUS IPSec Security For WLCs &
Microsoft Windows 2003 IAS Server
Microsoft Windows 2003 IAS Server
Document ID: 109774
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
IPSec RADIUS Configuration
Configure the WLC
Configure the IAS
Microsoft Windows 2003 Domain Security Settings
Windows 2003 System Log Events
Wireless LAN Controller RADIUS IPSec Success Debug Example
Ethreal Capture
Related Information
Prerequisites
Requirements
Components Used
Conventions
IPSec RADIUS Configuration
Configure the WLC
Configure the IAS
Microsoft Windows 2003 Domain Security Settings
Windows 2003 System Log Events
Wireless LAN Controller RADIUS IPSec Success Debug Example
Ethreal Capture
Related Information
Introduction
This guide documents how to configure the RADIUS IPSec feature supported by WCS and these WLAN
Controllers:
Controllers:
4400 Series
•
WiSM
•
3750G
•
The Controller RADIUS IPSec feature is located on the Controller GUI under the Security > AAA >
RADIUS Authentication Servers section. The feature provides a method for you to encrypt all RADIUS
communications between Controllers and RADIUS servers (IAS) with IPSec.
RADIUS Authentication Servers section. The feature provides a method for you to encrypt all RADIUS
communications between Controllers and RADIUS servers (IAS) with IPSec.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Knowledge on LWAPP
•
Knowledge on RADIUS Authentication and IPSec
•
Knowledge on how to configure services on the Windows 2003 Server Operating System
•
Components Used
These network and software components must be installed and configured in order to deploy the Controller
RADIUS IPSec feature:
RADIUS IPSec feature:
WLC 4400, WiSM, or 3750G Controllers. This example uses WLC 4400 that runs software version
5.2.178.0
5.2.178.0
•