Cisco Cisco ONS 15310-MA SONET Multiservice Platform 信息指南
Cisco Systems, Inc.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 3 of 5
•
The Cisco ONS 15310-MA uses state-of-the-art, point-of-use power supplies for maximum system reliability.
Q.
Are there AC power options for the Cisco ONS 15310-MA?
A.
The Cisco ONS 15310-MA operates on –48V DC power, and there is no optional AC power input. If only AC power is available, the
Cisco AC/DC power rectifier (part number CSCO-ACDC-SYS) can be used for an effective DC power solution. For more information on the
Cisco AC/DC power rectifier, please visit:
www.cisco.com/en/US/products/ps6063/index.html
.
Q.
Which protection options are supported on the Cisco ONS 15310-MA?
A.
The Cisco ONS 15310-MA supports unidirectional-path switched ring (UPSR), linear 1+1, and path-protected mesh networking (PPMN)
as well as unprotected optical transmission. It also supports (but does not require) redundant controller cards for “hitless” switching. TDM
redundancy (1:1 protection on DS-1/DS-3/EC-1 cards) and RPR on Cisco ONS 15454 ML-Series cards are also optional.
Q.
What is the cross-connect capacity on the Cisco ONS 15310-MA?
A.
The cross-connect capacity is 2128 bidirectional VT1.5s and 384 bidirectional STS-1s.
Q.
What are the scaling capacities of the Cisco ONS 15310-MA?
A.
The Cisco ONS 15310-MA can aggregate up to:
•
168 DS-1s
•
6 DS-3s
•
32 Layer 1 10/100 Ethernet ports
•
32 Layer 2/3 10/100 Ethernet ports
•
4 multirate (OC-3, OC-12, OC-48) SFP ports, including CWDM and DWDM capabilities
Q.
What SFP adapters are available for use on the Cisco ONS 15310-MA?
A.
The Cisco ONS 15310-MA supports the following SFP adapters:
•
OC-3 – 1310 nanometer (nm) intermediate reach, 1310-nm and 1550-nm long reach, CWDM
•
OC-12 – 1310-nm intermediate reach, 1310-nm and 1550-nm long reach, CWDM
•
OC-48 – 1310-nm intermediate reach, 1310-nm and 1550-nm long reach, CWDM, DWDM
Q.
What is the default IP address on a new Cisco ONS 15310-MA?
A.
The IP address resides on the controller card, and comes with the default IP address of 192.168.1.2.
Q.
How is the Cisco ONS 15310-MA managed?
A.
The Cisco ONS 15310-MA uses both Cisco Transport Controller and Cisco Transport Manager Version 7.0. Cisco Transport Controller is
a simple Java-based GUI that works via IP. Because other Cisco ONS platforms use this same GUI, the convenience of full management, alarm
monitoring, and A–Z provisioning are available from anywhere in the network. Other industry-standard management interfaces such as
Transaction Layer 1 (TL1), Simple Network Management Protocol (SNMP), and Common Object Request Broker Architecture (CORBA) are
also supported.
Q.
Does the Cisco ONS 15310-MA operate on the same software coding as other Cisco optical products?
A.
Yes, the Cisco ONS 15310-MA operates on the same software code as the ONS 15310-CL, ONS 15454, and the ONS 15600.