Cisco Cisco NSS326 6-Bay Smart Storage 白皮書
Security Considerations White Paper for Cisco Smart Storage
21
White Paper
Enable SNMPv3
To enable SNMPv3:
STEP 1
Log in to the NAS by opening a web browser and entering the IP address of the
NAS device. It is important to include the port 8080 following the IP address.
For example:
For example:
http://<NAS IP address>:8080
STEP 2
Choose
Network Services > SNMP Settings
from the Navigation menu. The
SNMP Settings
window opens.
STEP 3
Check the
Enable SNMP Service
check box and select the SNMP Version to be
SNMPv3
.
STEP 4
If the “Use Authentication” method is used, check this box and enter the
Authentication Protocol (
HMAC-MD5
or
HMAC-SHA
).
STEP 5
If the “Use Privacy” Method is used, check this box and enter the Privacy
Password.
STEP 6
Click
Apply
.
Figure 17 SNMP Configuration