Cisco Cisco Expressway
If multiple peers need restarting: restart each peer in turn, waiting for the peer to be accessible through the
web interface before restarting the next peer.
web interface before restarting the next peer.
10. Check that configuration data exists as expected (
System
,
Configuration
and
Application
menus).
On other devices:
If you have any other Expressways neighbored (or connected via a traversal zone) to this cluster of
Expressway peers, ensure that their zone configuration for this cluster is updated to include the address of
this new peer.
Expressway peers, ensure that their zone configuration for this cluster is updated to include the address of
this new peer.
On each Expressway peer (including the master and this new Expressway peer):
Go to
Status > Alarms
. If there is an alarm that the Expressway must be restarted, go to
Maintenance >
Restart options
and then click Restart.
If multiple peers need restarting: restart each peer in turn, waiting for the peer to be accessible through the
web interface before restarting the next peer.
web interface before restarting the next peer.
Check replication status
It can take 5 or more minutes before Expressway reports the successful status. If problems are seen, refresh
the screen after waiting 5 minutes.
the screen after waiting 5 minutes.
Go to
System > Clustering
and check that the cluster database status reports as Active.
Additional cluster configuration
If the cluster has non-default trusted CA certificate and / or non default server certificate ensure that the
added peer is configured with the required trusted CA certificate and an appropriate server certificate.
added peer is configured with the required trusted CA certificate and an appropriate server certificate.
Adding an X8.6 Expressway to an Expressway X8.6 cluster is now complete.
Cisco Expressway Cluster Creation and Maintenance Deployment Guide (X8.6)
Page 15 of 40
Adding an Expressway to an existing cluster