Cisco Cisco Web Security Appliance S360 信息指南
Contents
Introduction
Question
CLI
GUI
Expected outputs
Successful submission
Unsuccessful submission
Introduction
This document describes the process on how to install feature keys on Cisco
Contributed by Handy Putra, Cisco TAC Engineer.
Question
How to install feature keys on a Cisco ESA, WSA and SMA
Feature Keys are sent from Cisco through email to your nominated address. The email is sent
from "do-not-reply@cisco.com" with an attachment that contains the feature keys for install.
from "do-not-reply@cisco.com" with an attachment that contains the feature keys for install.
Sample feature keys in the attachment below:
To install the feature keys on the appliance via the Command Line Interface (CLI) or the Graphical
User Interface (GUI). Please see the process below:
User Interface (GUI). Please see the process below:
CLI
CLI> featurekey
Enter feature key, or press Enter to go to the main prompt.
[]> <feature key - from the example above copy and paste the "key" section>
GUI
Under System Administration ---> Feature Keys in the 'Feature Activation' section, enter
the feature key into the 'Feature Key' field.
the feature key into the 'Feature Key' field.
1.
Click 'Submit key'.
2.
Below is the screenshot from the GUI for the above instructions: