Cisco Cisco Unified MeetingPlace Audio Server 安装指南
Cisco MeetingServer 5.1 Installation Planning Guide
121
Cisco Systems
March 2003
Worksheet 4-6
Ports
The Ports parameters define what access type to assign to each port that
connects MeetingPlace to the telephone network.
connects MeetingPlace to the telephone network.
Field
Default Value
Options
Your Value
Port Information
1.
Server number
Predefined
Numeric—0 to 8.
2.
ID number
Predefined
Numeric—0 to 1151.
3.
Span ID
(Digital trunks only)
(Digital trunks only)
Predefined
Numeric—0 to 47. Value of
–1 if port is not configured.
–1 if port is not configured.
4.
Card ID
Predefined
Numeric—0 to 11. Value of
–1 if port is not configured.
–1 if port is not configured.
5.
Port group ID
Numeric—0 through 31. Use
–1 if the port does not belong
to any port group.
–1 if the port does not belong
to any port group.
6.
Use group defaults?
Yes
Yes or No.
Note: When Use Group Defaults is Yes, the remainder of the fields are
retrieved from the group profile and become read-only.
retrieved from the group profile and become read-only.
Port Characteristics
7.
Active?
Yes
Yes or No.
8.
Provider
Alphanumeric—0 to 17.
9.
Circuit ID
Alphanumeric—0 to 17.
10.
Card type
Based on system
configuration
configuration
T1, E1, IP, or None
(unassigned).
(unassigned).
T1, E1, IP, or None
11.
Signaling protocol
Based on system
configuration
configuration
For T1: Loop Start, Ground
Start, E&M Wink Start,
Clear Channel; or Protocol
Table for any AudioCodes-
supported integration such as
ISDN-PRI.
Start, E&M Wink Start,
Clear Channel; or Protocol
Table for any AudioCodes-
supported integration such as
ISDN-PRI.
For E1: Any E1 for any
Aculab-supported integration
such as Euro ISDN or
DPNSS; or Protocol Table
for any AudioCodes-
supported integration such as
Euro ISDN or QSIG.
Aculab-supported integration
such as Euro ISDN or
DPNSS; or Protocol Table
for any AudioCodes-
supported integration such as
Euro ISDN or QSIG.