Cisco Cisco Unified MeetingPlace Audio Server 维护手册
C H A P T E R
3-1
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
3
Installing the 8112 Server
This chapter describes how to physically install the 8112 server, including the following steps:
1.
Evaluating the site to ensure that all necessary facilities are available before beginning the
installation process and all site requirements have been met. Refer to the
installation process and all site requirements have been met. Refer to the
.
2.
Unpacking the system. Refer to the
3.
Installing the system by physically mounting the server. Refer to the
4.
Connecting the components of the server to the various communications interfaces. Refer to the
Note
If this installation is part of a conversion from PCI to 8112, refer to the installation and
upgrade document for the appropriate version. If you do not have access to this, please
contact the Cisco TAC.
upgrade document for the appropriate version. If you do not have access to this, please
contact the Cisco TAC.
Important safety instructions
Save these instructions and requirements
Warning
Never install telephone wiring during a lightning storm.
Warning
Never install a telephone jack in a wet location unless the jack is specifically designed for wet
locations.
locations.
Warning
Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
disconnected at the network interface.