Cisco Cisco Unified MeetingPlace Audio Server 维护手册
7-20 Solving problems
Cisco MeetingPlace Audio Server System Manager’s Guide
February 27, 2004
I
MPORTANT
The following are ranges of alarm codes that represent unusual
conditions in the MeetingPlace system. Report any of these codes to your
MeetingPlace support representative:.
MeetingPlace support representative:.
Interpreting alarm lights on the server (8112)
The MeetingPlace 8112 server has System Status and Alarm lights on the
upper part of the front panel. It also has System Status lights on each Smart
Blade.
upper part of the front panel. It also has System Status lights on each Smart
Blade.
When the system is functioning properly, the lights are green. When the
system detects a problem, one or more lights are either red or yellow. In such
cases, refer to the Alarm Table for more information and contact your
MeetingPlace support representative as required.
system detects a problem, one or more lights are either red or yellow. In such
cases, refer to the Alarm Table for more information and contact your
MeetingPlace support representative as required.
The 8112 server also has System Status lights on the Hot Swap Controller
(HSC).
(HSC).
Code
Description
050000-05FFFF—Conference
Scheduler
Scheduler
This failure affects the writing or reading of a
single database record.
single database record.
060000-06FFFF—Workstation
Server Failure
Server Failure
This failure affects one workstation’s
connection to MeetingTime.
connection to MeetingTime.
080000-08FFFF—Voice User
Interface
Interface
An error in the VUI module typically affects a
single caller.
single caller.
090000-09FFFF—Data Base
Failure
Failure
This failure can affect a single phone call or the
entire system.
entire system.