Fujifilm FUJIFILM X-Pro1 业主指南

Automatically vary settings over a series of pictures.

 Press the DRIVE button to display drive options and press the selector up or down 

to highlight one of the following:

Press the selector left or right to highlight a bracketing amount.  Each time the shutter 
button is pressed, the camera will take three shots at up to about 6 fps: one using the 
metered value for exposure, the second overexposed by the selected amount, and the 
third underexposed by the same amount (regardless of the amount selected, exposure 
will not exceed the limits of the exposure metering system).

Press the selector left or right to highlight a bracketing amount.  Each time the shutter 
is released, the camera will take a picture at the current sensitivity (

P 48) and process it 

to create two additional copies, one with sensitivity raised and the other with sensitivity 
lowered by the selected amount (regardless of the amount selected, sensitivity will not 
exceed ISO 6400 or fall below ISO 200).

Each time the shutter is released, the camera takes one shot and processes it to create 
copies with the fi lm simulation settings selected for 

X FILM SIMULATION BKT in the 

shooting menu (

P 68).

Each time the shutter button is pressed, the camera takes three shots with diff erent 
dynamic ranges (

P 68): 100% for the fi rst, 200% for the second, and 400% for the third. 

The shots are taken at rates of up to about 6 fps.  While dynamic range bracketing is in 
eff ect, sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in 
eff ect is restored when bracketing ends.

±

±

±

Press MENU/OK to select the highlighted option.

 Take photographs.