Fujifilm FUJIFILM X10 业主指南
87
Men
u
s
Using the Menus: Shooting Mode
n
n
FACE RECOGNITION
FACE RECOGNITION
Add portrait subjects to the face recognition da-
tabase. These subjects will be given priority dur-
ing Intelligent Face Detection, and their names
and other information can be viewed during play-
back (
tabase. These subjects will be given priority dur-
ing Intelligent Face Detection, and their names
and other information can be viewed during play-
back (
P 53).
I
I
FLASH
[±0]
FLASH
[±0]
Adjust flash brightness. Choose from values be-
tween +
tween +
2
/
3
EV and –
2
/
3
EV. The default setting is ±0.
Note that the desired results may not be achieved
depending on shooting conditions and the dis-
tance to the subject.
depending on shooting conditions and the dis-
tance to the subject.
g
g
EXTERNAL FLASH
[OFF]
EXTERNAL FLASH
[OFF]
Choose ON when using an optional flash unit (ex-
cept Fujifilm products) mounted on the camera
hot shoe.
cept Fujifilm products) mounted on the camera
hot shoe.
c
• The flash may not fully light the subject at speeds
• The flash may not fully light the subject at speeds
faster than
1
/
1000
s.
• Use auto or custom white balance (
P 49).
• If the built-in flash is raised when ON is selected for
g EXTERNAL FLASH, the built-in flash will fire once
to provide a signal for the optional flash unit to fire.
to provide a signal for the optional flash unit to fire.
• External flash units can be used in P, S, A, M or EXR
(
S and T only) modes.
• Fujifilm external flash units do not require this set-
ting.
a
• The camera can be used with flash units that provide
• The camera can be used with flash units that provide
aperture adjustment, external metering, and sensitiv-
ity control. Some flash units that are designed spe-
cifically for other cameras can not be used.
ity control. Some flash units that are designed spe-
cifically for other cameras can not be used.
• For information on Fujifilm external flash units, see
Accessories from FUJIFILM (
P 107).
K
K
CUSTOM SET
CUSTOM SET
Save settings for P, S, A, M and all EXR modes ex-
cept
cept
R (P 27).