Fujifilm FinePix S1 业主指南
![Fujifilm](https://files.manualsbrain.com/attachments/92165c0a413be2bbfd4eb5f3c1cf768a66ca5e1e/common/fit/150/50/1c1990aa4fd68d6b9f8197ae2933df14f0e6eb9f522c7305b7540487c75a/brand_logo.png)
51
M
or
e
on
Ph
ot
og
ra
ph
y
D
WHITE BALANCE
For natural colors, select D WHITE BALANCE in the shooting menu and choose a setting that match-
es the light source.
es the light source.
Option
Description
AUTO White balance adjusted automatically.
h
Measure a value for white balance.
i
For subjects in direct sunlight.
j
For subjects in the shade.
k
Use under “daylight” fluorescent lights.
l
Use under “warm white” fluorescent lights.
m
Use under “cool white” fluorescent lights.
n
Use under incandescent lighting.
If AUTO does not produce the desired results (for
example, when taking close-ups), select h and
measure a value for white balance or choose the
option that matches the light source.
example, when taking close-ups), select h and
measure a value for white balance or choose the
option that matches the light source.
1
• At settings other than h, auto white balance is used
with the flash. Lower the flash (P 41) to take pictures
at other settings.
at other settings.
• Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
■
h: Custom White Balance
Choose h to adjust white balance for unusual
lighting conditions. White balance measurement
options will be displayed; frame a white object so
that it fills the monitor and press the shutter but-
ton all the way down to measure white balance.
If “COMPLETED!” is displayed, press MENU/OK to set
white balance to the measured value. This value
can be reselected by pressing MENU/OK when cus-
tom white balance options are displayed.
If “UNDER” is displayed, raise exposure compensa-
tion (P 49) and try again.
If “OVER” is displayed, lower exposure compensa-
tion and try again.
lighting conditions. White balance measurement
options will be displayed; frame a white object so
that it fills the monitor and press the shutter but-
ton all the way down to measure white balance.
If “COMPLETED!” is displayed, press MENU/OK to set
white balance to the measured value. This value
can be reselected by pressing MENU/OK when cus-
tom white balance options are displayed.
If “UNDER” is displayed, raise exposure compensa-
tion (P 49) and try again.
If “OVER” is displayed, lower exposure compensa-
tion and try again.
2
To give a deliberate color cast to your photographs,
measure a value for custom white balance using a col-
ored instead of a white object.
measure a value for custom white balance using a col-
ored instead of a white object.