Cisco Cisco WAP150 Wireless-AC N Dual Radio Access Point with PoE 维护手册

Changing the Default Password

Cisco WAP150 and WAP361 Administration Guide

14

The WAP device was configured successfully. You are required to log in again with 
the new password.

For security reasons, you are required to change the administrative password 
from its default settings at your first login. If you click Cancel to bypass the wizard, 
the Change Password page appears. You can then change the default password 
for logging in. 

Password complexity is enabled by default. The minimum password complexity 
requirements are shown on the Change Password page. The new password must 
comply with the default complexity rules, or it can be disabled temporarily by 
disabling Password Complexity. See 

 for more 

information.

To change the default administrative password:

Enter the following fields to set a new password:

•

Old Password—Enter the current password (default is cisco).

•

New Password—Enter a new password.

•

Confirm Password—Enter the new password again for confirmation.

•

Password Strength Meter—Displays the strength of the new password.

•

Password Complexity—The password complexity enabled by default 
requires the password to conform to the following complexity settings:

-

Is different from the user name.

-

Is different from the current password.

-

Has a minimum length of eight characters.

-

Contains characters from at least three character classes (uppercase 
letters, lowercase letters, numbers, and special characters available on a 
standard keyboard).

Check Disable next to the Password Complexity option if you want to 

disable the password complexity rules. However, we strongly recommend keeping 
the password complexity rules enabled.