Cisco Cisco WAP150 Wireless-AC N Dual Radio Access Point with PoE 维护手册

Wireless Multicast Forwarding Statistics

Cisco WAP150 and WAP361 Administration Guide

25

The Wireless Multicast Forwarding Statistics page provides some basic 
information about the current AP and a real-time display of the transmit and 
receive statistics for the Wireless Multicast Traffic interface on the AP and for the 
VAPs on both radio interfaces All transmit and receive statistics shown are totals 
since the AP was last started. If you reboot the AP, these figures indicate transmit 
and receive totals since the reboot.

To show the Wireless Multicast Forwarding Statistics page, select Status and 
Statistics>Wireless Multicast Forwarding Statistics in the navigation pane.

•

Interface—Name of the Ethernet interface and each VAP and WDS 
interface.

WLAN0 and WLAN1 precede the VAP interface name to indicate the radio 
interface (WLAN0 represents radio 1 and WLAN1 represents radio 2).

•

Mcast-Data-Frames—Shows Multicast data frames received.

•

Mcast-Data-Fwd—Indicates Multicast data frames forwarded.

•

Mcast-Data-Flooded—Indicates Multicast data frames flooded.

•

Mcast-Data-Sentup—Indicates Multicast data frames sent up.

•

Mcast-Data-Dropped—Indicates Multicast data frames dropped.

•

Interface—Name of the Ethernet interface and each VAP and WDS 
interface.

WLAN0 and WLAN1 precede the VAP interface name to indicate the radio 
interface (WLAN0 represents radio 1 and WLAN1 represents radio 2).

•

IGMP-Frames—Shows IGMP frames received.

•

IGMP-Frames-Fwd—Show IGMP membership queries received.

•

IGMP-Frames-Sentup—Shows IGMP membership reports seen.

•

Mfdb-cache-Hits—Shows MFDB cache hits.

•

Mfdb-Cache-Misses—Shows MFDB cache misses.