Cisco Cisco DWDM Transceiver Modules 安装指南
Americas Headquarters:
© 2007–2010 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installation Notes for the Cisco
TwinGig and OneX Converter Modules
TwinGig and OneX Converter Modules
PID: CVR-X2-SFP and CVR-X2-SFP10G
This note provides the installation instructions for the Cisco TwinGig and OneX
Converter Modules. This document contains these sections:
Converter Modules. This document contains these sections:
•
•
•
•
TwinGig Overview
The Cisco TwinGig Converter Module (model CVR-X2-SFP),
also known as a
converter module, is a hot-swappable input/output (I/O) device that slides into a
10-Gigabit Ethernet X2 slot on a switch. It converts the 10-Gigabit X2 interface
into a dual SFP interface. It was developed for the Catalyst 3560-E switch but is
supported on other platforms. The converter module is shown in
10-Gigabit Ethernet X2 slot on a switch. It converts the 10-Gigabit X2 interface
into a dual SFP interface. It was developed for the Catalyst 3560-E switch but is
supported on other platforms. The converter module is shown in
.