Cisco Cisco Unified MeetingPlace 7.0 故障排查指南
MeetingPlace Network Backup Gateway Fails to
Backup MeetingPlace Configuration
Backup MeetingPlace Configuration
Document ID: 107999
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Problem
Solution
Related Information
Prerequisites
Requirements
Components Used
Conventions
Problem
Solution
Related Information
Introduction
This document discusses the troubleshooting steps that must be taken when the Cisco MeetingPlace network
backup gateway fails to back up the MeetingPlace configuration.
backup gateway fails to back up the MeetingPlace configuration.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco MeetingPlace Network Backup Gateway
•
Cisco Unified MeetingPlace
•
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Problem
After you configure the MeetingPlace network backup gateway, the gateway begins to back up the
MeetingPlace database but fails with this error message:
MeetingPlace database but fails with this error message:
Setting up temporary directory and files...
Thu Oct 12 15:13:59 EDT 2006 Getting 'Ready' File...