Cisco Cisco Video Surveillance 6020 IP Camera 安装指南

To adjust the IP camera viewing angle and focus and complete the installation of the IP camera, perform 
the following steps. For information about viewing video, see 

.

Log in to the IP camera.

The Home window appears.

While viewing video in the Home window, take these actions to adjust the viewing angle:

Loosen the two screws on the sides of the lens module, as shown in the following figure.

Do not remove the screws.

Primary DNS

IP address of the primary DNS server, if configured for the IP camera.

Secondary DNS

IP address of the secondary DNS server, if configured for the IP camera.

User

IP camera user name of each user who is accessing the primary video stream 
(Stream 1) or the secondary video stream (Stream 2) through a client PC or 
a third-party device.

Be default, users appear in order of start time. To displays users in ascending 
order of any information in any corresponding column, click the column 
heading. Click a column heading again to reverse the display order.

IP Address

IP address of the client device.

Start Time

Time and date that the client accessed the video stream for this session.

Elapsed Time

Length of time that the client has been accessing the video stream.